Product
Features
• Compatible with Various American Dynamics, Philips
(Burle), and Vicon® Controllers (as specified)
• Converts Command Signals to
Pelco's "D" Protocol
• For Use in Spectra® Domes and Esprit™ Systems
•
Easy to Install Subassembly
• Operation Transparent to User
The TXB Series Translator
Boards allow various controllers to communicate with Pelco's Spectra® domes and
Esprit™ systems. The optional subassembly is easy to install in Spectra and
Esprit equipment. After setup, the Spectra dome or Esprit system receives
commands from the controller and converts them into Pelco's "D"
protocol.
The TXB Series has been tested
and shown to work with the following systems:
TXB-AD American
Dynamics:
AD1600 Series
AD2050 Series
AD2091 Series
AD2150
Series
TXB-B Philips
(Burle):
LTC5136 AutoDome® Controller
LTC5138 Virtual Keyboard (Rev.
1.10)
LTC8300 Series
LTC8500 Fixed Speed Series
LTC8800 Variable Speed
Series
LTC8850 Graphical User Interface
TXB-V Vicon Industries,
Inc.:
V1300X-DVC Remote Control
V1422 Matrix Controller
VPS324 Matrix
Controller
V4480SCC Matrix 44® Card Cage
V6680SCC Matrix 66™ Card
Cage
Based on the information
published by the manufacturers of these controls, Pelco has reason to believe
the TXB Series will also work with additional models listed on the reverse side
of the product specification sheet.
All companies make changes and
improvements in their products on a regular basis. Because this product is
interfacing with equipment not manufactured by Pelco, the possibility exists
that the interface protocols have changed or are in a different configuration
from earlier tested units; therefore, an incompatibility may occur. The
existence of prior successful installations indicates our intent to provide
equipment compatible with other manufacturers, but does not guarantee successful
results without on-site integration testing.
Pelco recommends purchasing a
single unit for bench testing before the purchase and installation of this
product in quantity. Should any problems occur, Pelco will provide on-site
technical support (North American installations only) to analyze the interface
protocols of your system. We will typically schedule this visit within one week
of when the problem is reported to Pelco Technical Support. Pelco will, at its
expense, endeavor to correct the interface incompatibility within two weeks on a
high priority basis. During these visits, the end user must agree to give Pelco
reasonable access to the system in order to study and correct the protocol
incompatibility.
In the unlikely event that
Pelco is unable to make the translator work in the system, Pelco will accept the
return of any Pelco products associated with the translator and refund the
amounts paid for these products plus freight expenses. Because Pelco recommends
a bench test prior to installation, Pelco will not be liable for any
installation costs or lost revenues in the event it cannot solve the
compatibility problem.
Models
TXB-AD | Translator board for AD controllers|
TXB-B
| Translator board for Phillips (Burle) controllers
TXB-V | Translator
board for Vicon® controllers
